If your job requires a unit at the top of the food chain, look no further than the VT320. This vertical lift track loader is the largest in our offering and is willing to compete with any other unit in the trenches, where it matters. A 85 kW engine and 1,452 kg of rated operating capacity gives this unit the tractive effort and muscle needed to break out of piles. The VT320 is the bite, not the bark.
Capacities | Metric | Imperial |
Operating Weight | 5352 kg | 11799 lbs |
Operating Capacity at 35% Tipping Load | 1452 kg | 3201 lbs |
Operating Capacity At 50% Tipping Load | 2074 kg | 4572 lbs |
Tipping capacity | 4148 kg | 9145 lbs |
Weight and dimensions | ||
Overall Operating Height - Fully Raised | 4298 mm | 169 in |
Height to Hinge Pin - Fully Raised | 3302 mm | 130 in |
Reach - Fully Raised | 1026 mm | 40 in |
Dump angle at full height | 41 ° | 41 ° |
Dump Height - Fully Raised | 2530 mm | 100 in |
Maximum Rollback Angle - Fully Raised | 90.30 ° | 90.30 ° |
Overall Height to Top of ROPS | 2111 mm | 83 in |
Overall length with bucket | 4059 mm | 160 in |
Overall Length without Bucket | 3243 mm | 128 in |
Specified Height | 1938 mm | 76 in |
Reach at Specified Height | 751 mm | 30 in |
Maximum Rollback Angle at Ground | 31 ° | 31 ° |
Carry Position | 199 mm | 8 in |
Maximum Rollback Angle at Carry Position | 31 ° | 31 ° |
Digging Position | 19 mm | 1 in |
Angle of Departure with STD Counterweight | 23.50 ° | 23.50 ° |
Ground clearance | 309 mm | 12 in |
Track gauge | 1313 mm | 52 in |
Track Shoe Width | 450 mm | 18 in |
Crawler base | 1570 mm | 62 in |
Overall width less bucket | 1766 mm | 70 in |
Bucket Width | 2131 mm | 84 in |
Clearance Radius - Front with Bucket | 2489 mm | 98 in |
Clearance Circle - Rear | 1870 mm | 74 in |
Track Type / Roller Type | Rubber / Steel | Rubber / Steel |
Performances | ||
Ground Speed - Single Speed | 8.60 km/h | 5 mph |
Drawbar Pull/Tractive Effort | 5792 kg | 12769 lbs |
Bucket Breakout - Tilt Cylinder | 4492 kg | 9903 lbs |
Bucket Breakout - Lift Cylinder | 3398 kg | 7491 lbs |
Engine | ||
Engine brand | Deutz | Deutz |
Engine model | TD 3.6 EPA Tier IV | TD 3.6 EPA Tier IV |
Motor Type | Axial Piston with planetary gear box reduction | Axial Piston with planetary gear box reduction |
Gross Power (kW) / Gross Power | 85 kW / 2300 rpm | 85 kW / 2300 rpm |
Battery | 12 V | 12 V |
Cold Cranking Amps at Temperature (CCA) | 1600 A | 1600 A |
Alternator - Voltage / Ampere | 14 V / 120 A | 14 V / 120 A |
Hydraulics | ||
Standard flow - Auxiliary hydraulics | 110 l/min | 110 l/min |
Tank capacities | ||
Hydraulic tank capacity | 37.60 l | 10 US gal |
Fuel tank | 121.10 l | 32 US gal |
Displacement / Number of cylinders | 3.60 l / 4 | 1 US gal / 4 |