At 1,850 lbs. of rated operating capacity this machine is not to be underestimated. The IdealAccess fold up door makes entering and exiting the cab a piece of cake. On wet, dirty, muddy jobsites this track loader shines. Visit a dealer today to get behind these operator and maintenance friendly hydraulic pilot controls. Daily tasks change and this machine is suitable to be your army knife multi-tool that fits every job perfectly.
Capacities | Metric | Imperial |
Operating Weight | 4128 kg | 9101 lbs |
Operating Capacity at 35% Tipping Load | 839 kg | 1850 lbs |
Operating Capacity At 50% Tipping Load | 1199 kg | 2643 lbs |
Tipping capacity | 2398 kg | 5287 lbs |
Weight and dimensions | ||
Overall Operating Height - Fully Raised | 4267 mm | 168 in |
Height to Hinge Pin - Fully Raised | 3251 mm | 128 in |
Reach - Fully Raised | 876 mm | 34 in |
Dump angle at full height | 40.20 ° | 40.20 ° |
Dump Height - Fully Raised | 2489 mm | 98 in |
Overall Height to Top of ROPS | 2103 mm | 83 in |
Overall length with bucket | 3754 mm | 148 in |
Overall Length without Bucket | 2921 mm | 115 in |
Specified Height | 1715 mm | 68 in |
Reach at Specified Height | 790 mm | 31 in |
Dump angle at specified height | 66.80 ° | 66.80 ° |
Maximum Rollback Angle at Ground | 30 ° | 30 ° |
Carry Position | 208 mm | 8 in |
Maximum Rollback Angle at Carry Position | 31.60 ° | 31.60 ° |
Digging Position | 23 mm | 1 in |
Angle of Departure with STD Counterweight | 30.40 ° | 30.40 ° |
Ground clearance | 318 mm | 13 in |
Track gauge | 1313 mm | 52 in |
Track Shoe Width | 320 mm | 13 in |
Crawler base | 1382 mm | 54 in |
Overall width less bucket | 1636 mm | 64 in |
Bucket Width | 1674 mm | 66 in |
Clearance Radius - Front with Bucket | 2322 mm | 91 in |
Clearance Circle - Rear | 1666 mm | 66 in |
Track Type / Track Rollers / Roller Type | Rubber / 4 / Steel | Rubber / 4 / Steel |
Performances | ||
Track Type / Track Rollers / Roller Type | 9.50 km/h | 6 mph |
Drawbar Pull/Tractive Effort | 4635 kg | 10218 lbs |
Bucket Breakout - Tilt Cylinder | 2429 kg | 5355 lbs |
Bucket Breakout - Lift Cylinder | 2275 kg | 5016 lbs |
Engine | ||
Engine Brand | Yanmar | Yanmar |
Engine model | 4TNV98CT-XNMSV Stage V | 4TNV98CT-XNMSV Stage V |
Motor Type | Axel Piston with planetary gear box reduction | Axel Piston with planetary gear box reduction |
Gross Power (kW) / Gross Power | 51.70 kW / 2500 rpm | 51.70 kW / 2500 rpm |
Battery | 12 V | 12 V |
Cold Cranking Amps at Temperature (CCA) | 850 A | 850 A |
Alternator - Voltage / Ampere | 14 V / 100 A | 14 V / 100 A |
Hydraulics | ||
Standard flow - Auxiliary hydraulics | 70 l/min | 70 l/min |
Tank capacities | ||
Hydraulic tank capacity | 41.60 l | 11 US gal |
Fuel tank | 91 l | 24 US gal |
Displacement / Number of cylinders | 3.31 l / 4 | 1 US gal / 4 |