Super compact with full-size performance, this little guy packs a punch in the tightest of spaces. The RS4-14 doesn't sacrifice comfort for size, with a full-size operator station and 360-degree visibility, you'll sit comfortably until the job is done. There are three steering modes of 2-wheel, 4-wheel and crab that can be switched with a simple click of a button at your fingertips. Maneuver around tight corners on the jobsite with ease in this small but mighty RS4-14.
Capacities | Metric | Imperial |
Max. capacity | 1995.81 kg | 4400 lbs |
Max. lifting height | 4.34 m | 14 ft 3 in |
Max. outreach | 2.74 m | 9 ft |
Breakout force with bucket | 1886 daN | 1886 daN |
Weight and dimensions | ||
Overall length to carriage | 3.64 m | 11 ft 11 in |
Overall width | 1.49 m | 4 ft 11 in |
Overall height | 1.91 m | 6 ft 3 in |
Wheelbase | 2.13 m | 7 ft |
Ground clearance | 0.24 m | 9 in |
Overall cab width | 0.80 m | 2 ft 7 in |
Tilt-up angle | 12 ° | 12 ° |
Tilt-down angle | 116 ° | 116 ° |
External turning radius (over tyres) | 3.07 m | 10 ft 1 in |
Unladen weight (with forks) | 4190 kg | 9237 lbs |
Tyres type | Pneumatic | Pneumatic |
Standard tyres | Camso SKS-532 - 12 - 16.5-12PR | Camso SKS-532 - 12 - 16.5-12PR |
Performances | ||
Lifting | 5 s | 5 s |
Lowering | 3.50 s | 3.50 s |
Extension | 4.80 s | 4.80 s |
Retraction | 3 s | 3 s |
Crowd | 3.30 s | 3.30 s |
Dump | 2.70 s | 2.70 s |
Engine | ||
Engine brand | Kubota | Kubota |
Engine norm | Stage V | Stage V |
Engine model | 2607-CR-E5 | 2607-CR-E5 |
Number of cylinders / Capacity of cylinders | 4 - 2615 cm³ | 4 - 160 in³ |
I.C. Engine power rating - Power (kW) | 56.30 Hp / 42 kW | 56.30 Hp / 42 kW |
Max. torque / Engine rotation | 174 Nm @ 2700 rpm | 174 Nm @ 2700 rpm |
Drawbar pull (Laden) | 2850 daN | 2850 daN |
Transmission | ||
Transmission type | Hydrostatic | Hydrostatic |
Number of gears (forward / reverse) | 2 / 2 | 2 / 2 |
Max. travel speed | 25 km/h | 16 mph |
Parking brake | Automatic Negative Hand-brake | Automatic Negative Hand-brake |
Service brake | Disk brake on the cadran shaft | Disk brake on the cadran shaft |
Axle Manufacturer | Dana | Dana |
Hydraulics | ||
Hydrualic pump type | Gear pump | Gear pump |
Hydraulic flow / Pressure | 77.41 l/min / 235 bar | 77.41 l/min / 3408 PSI |
Tank capacities | ||
Engine oil | 10.20 l | 3 US gal |
Hydraulic oil | 68.14 l | 18 US gal |
Fuel tank | 60 l | 16 US gal |
Noise and vibration | ||
Noise at driving position (LpA) | 76 dB(A) | 76 dB(A) |
Noise to environment (LwA) | 104 dB(A) | 104 dB(A) |
Vibration on hands/arms | < 2.50 m/s² | < 2.50 m/s² |
Miscellaneous | ||
Steering wheels (front / rear) | 2 / 2 | 2 / 2 |
Drive wheels (front / rear) | 2 / 2 | 2 / 2 |
Safety / Safety cab homologation | Standard EN 15000 / ROPS/FOPS | Standard EN 15000 / ROPS/FOPS |
Controls | Single Joystick FNR | Single Joystick FNR |