Exmark LZE801GKA724A1

Exmark LZE801GKA724A1 for sale at Altman Tractor Co., SC

Double tap to zoom

Exmark LZE801GKA724A1 for sale at Altman Tractor Co., SC

 

Features

Hydro Drive, Simplified

Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.

Unibody Frame

Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”

Less Time At The Pump

Gas-powered E-Series models have a single 8-gallon tank with one fill location.

On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

Specifications

NOTES: N/A in California

EQUIPMENT  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Drive Tires 24 x 12-12, 4 ply Super Turf®
Tractor Frame Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires 13 x 6.50-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated disc brake.
Seat Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators' Position.
Electrical 12-volt battery with 15-amp alternator.
Standard Features Engine hour meter and cup holder
UPC 1.93308000534
POWER COMPONENTS  
Engine Brand Kawasaki
Engine Model FX801V
Engine Displacement 852
Engine Series V-Twin
Engine Speed 3,750 RPM
Air Filter Heavy-duty canister air filtration system
Fuel Type Gas Carbureted
Fuel Capacity 8-gallon (30.3-L) single fuel tank with single fill location.
Fuel Indicator Yes - electronic Sender
Drive Hydro-Drive
Drive Description Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 200-ft-lb clutch with spot brake
Drive Wheel Release Allows unit movement without engine running.
Casters .50" thick caster yoke arms.
Engine Spec _S07
DECKS  
Width / Cutting Deck 72"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator's seat.
Blades 3 Blades at 24.50" Length
DIMENSIONS  
Width 84.9 in. (215.6 cm)
Length 86.1 in. (218.7 cm)
Height 70.5 in. (179.1 cm)
Curb Weight 1244

Accessories and Attachments

LazerZ Hitch KitHitch Kit

Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.

 

 

ExmarkAccess NoimageLight Kit (not compatible with TC26)

Light Kit

 

 

LazerZ Micro Mulch SystemMicro-Mulch System

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

 

 

LazerZ Operator Controlled Discharge FootOperator Controlled Discharge (Foot)

The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

 

 

LazerZ 12 Volt Power Adapter12-Volt Power Adapter

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

 

 

LazerZ Equipment CoverEquipment Cover

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

 

 

ExmarkAccess NoimageExtended Drive Lever Kit

Improve your elbow room while you operate with extended drive levers.

 

 

ExmarkAccess NoimageHarness Add-On Accessory Kit

Take the hassle out of dual accessory fit up with this add-on harness.

 

 

LazerZ Hydro Maintenance KitHydro Maintenance Kit

Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)

 

 

LazerZ Trash Container Not compatible with 135 7320Trash Container (Not compatible with 135-7320)

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

 

 

LazerZ JackJack

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

 

 

LazerZ Jack Mount ReceiverJack Mount Receiver

Safely access the underside of your zero-turn mower’s deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.

 

 

LazerZ Sun Shade ROPSSun Shade (ROPS)

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

 

 

LazerZ Floor MatFloor Mat

Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).

 

 

LazerZ Power Deck LiftPower Deck Lift

Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.

 

 

LazerZ 3 Bushel Bagger3-Bushel Bagger

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models.

 

 

LazerZ Air Ride Suspension SeatAir Ride Suspension Seat

Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.

 

 

LazerZ Seat Isolation SystemSeat Isolation System

Reduces operator fatigue with a 3-dimensional, motion-isolated layout. Its rubber mounts allow 0.5-inch free movement in all directions, resulting in 12-hour days that feel more like 6. Fits Lazer E-Series models.

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

 

LazerZ Turf Striping KitTurf Striping Kit

Fits 48", 52" and 60" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

 

 

ExmarkAccess NoimageUltraVac Completing Kit

KIT, UV DRIVE 484 SPLINED 850,000 +

 

 

LazerZ UltraVac Quick Dump Collection SystemUltraVac Quick Dump Collection System

The UltraVac X Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 7 bushel capacity.

 

 

LazerZ UltraVac 2 Bag Collection SystemUltraVac 2-Bag Collection System

Switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.

Contact Us Hide

GOT A QUESTION?

Let us help you get moving.