1808 E. Pamplico Hwy Florence, SC | 
(843) 662-0151
Advanced Search
(843) 662-0151 
Browse All Equipment
Features
Operator Position
The large, open platform comfortably positions operators between the drive tires, making them feel integrated into the machine, while also allowing them to get on and off the machine quickly and efficiently.
Height of Cut
The height of cut system was developed for operators to quickly and accurately change the cut height by simply raising and lowering the deck.
Smart Controller
The intuitive Smart Controller reduces downtime with maintenance reminders and on-screen machine health diagnostics along with an enhanced interlock display with both engine and PTO hour displays.
Cut Quality
Available in a variety of deck widths, Staris S-Series features proven Exmark UltraCut Series 4 decks providing unmatched performance and Exmark's legendary quality of cut.
Drive System
The trusted pump and wheel motor combination provides commercial durability and smooth control. The system utilizes hard hydraulic lines reducing potential leak points, improving durability and hydro-oil cooling.
Serviceability
The flip up front cover gives operators easy access to perform routine lawn mower maintenance and cleaning, without the need for tools. The rear cover lifts and locks into place providing easy access to check and fill both engine oil and hydro fluid.
Specifications
NOTES: California Only
| Equipment | |
| Tractor Frame | Welded, heavy-duty 1.5" x 3" tubular steel. |
| Steering Control | Twin levers with adjustable front reference bar to modify forward ground speed. |
| Front Caster Tires | 12 x 6.0-6, smooth-tread, semipneumatic tires with tapered roller bearings. |
| Drive Tires | 23x8.50-12 Carlisle Turf Master |
| Parking Brake | Lever-actuated bar brake. |
| Blade Spindles | No maintenance, sealed and nongreasable spindles; 7.75" diameter cutter housing with 1.75" diameter splined blade driver 1.0"-diameter spindle shaft. |
| Electrical | 12-volt battery with 15-amp alternator. |
| Cup Holder | NO |
| Casters | .50 thick caster yoke arms with tapered roller bearings |
| Standard Features | Smart Controller |
| UPC | 193308002569 |
| Power Components | |
| Engine Brand | Kohler® |
| Engine Model | ECV650 |
| Fuel System | Electronic Fuel Injected |
| Engine Series | Command™ EFI |
| Engine Speed | 3,600 rpm |
| Engine Displacement | 694 |
| Engine HP* | 21* |
| Air Filter | Heavy-duty canister air filtration system |
| Drive System | HYDRO |
| Drive Description | Two Hydro Gear 12 cc pumps powering two Parker 12 cubic inch motors. |
| Speed | Infinitely variable speed selection 0–10.0 mph (12.9 kmph) forward, 0–4.0 mph (6.4 kmph) reverse |
| PTO Engagement | Warner 175 ft-lb clutch |
| Fuel Capacity | 10-gallon (37.9-L), dual fuel tanks with dual fill location. |
| Fuel Indicator | Yes - Float Gauge |
| Drive Wheel Release | Allows unit movement without engine running. |
| Safety Package | Operator Presence Controls (OPC) with safety interlock system indicators |
| Deck Lift | Single point HOC; with mechanical lift-assist spring. |
| Carb Compliant | YES |
| Fuel Type | Gas EFI |
| Engine Spec | 3020 |
| *THE GROSS HORSEPOWER OF GASOLINE ENGINES WAS LABORATORY RATED AT 3600 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1940 OR SAE J2723. THE GROSS HORSEPOWER OF THE 3TNV80FT WAS LABORATORY RATED AT 2600 RPM; THE 3TNV88C WAS LABORATORY RATED AT 3000 RPM BY THE ENGINE MANUFACTURER IN ACCORDANCE WITH SAE J1995. AS CONFIGURED TO MEET SAFETY, EMISSION AND OPERATING REQUIREMENTS, THE ACTUAL ENGINE HORSEPOWER ON THESE MOWERS MAY BE SIGNIFICANTLY LOWER. | |
| Decks | |
| Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt |
| Deck Style | Floating Deck |
| Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Width / Cutting Deck | 48" |
| Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from operator’s platform. |
| Blades | 3 Blades at 16.25" Length |
| Blade Tip Speed | Approximately 18,500 fpm. |
| Dimensions | |
| Width | 59.6" (151.4 cm) |
| Length | 69.3" (176.0 cm) |
| Height | 46.7" (118.6cm) |
| Curb Weight | 976 |
Accessories and Attachments
Strobe Light Kit
Strobe Light Kit
Micro-Mulch System
The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.
12-Volt Power Port
12-Volt Power Port
Equipment Cover
Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.
Anti-Scalp Roller Kit
Protect the trim side of your Lazer 60" UltraCut deck with this Anti-Scalp Roller kit. Fits Lazer 604 decks model year 2009 and above.
3-Bushel Bagger
Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models.
LED Light Kit
LED Light Kit
Operator Controlled Discharge (Hand)
The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.
Accessory Adapter Kit
Adapter for OCD & 3-Bushel Bagger
Hydro Maintenance Kit
Kit includes: 3 quarts of Exmark® Premium Hydraulic Oil and 1 Hydro Filter
Trash Container
TRASH CONTAINER
Turf Striping Kit
Turf Striping Kit
HideGOT A QUESTION?
Let us help you get moving.