L228 for sale at Altman Tractor Co., SC. Serving your new and used equipment needs from Florence, and Conway, SC.
Skid Steer Loaders
You can expect fast cycle times from the reliable hydraulic
system. The in-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional high-flow hydraulics on the L218, L220, L221, L228, L234, C227, C232,C238 to run attachments hour after hour. The Spring Applied Hydraulic Release (SAHR) parking brake can be released or applied by the press of a button and is automatically applied when machine is shut off.
The 200 Series dual-range transmission can provide travel
speeds in excess of 11 mph (8 mph on CTLs) to save time on and between job sites. It is standard on the L220, L221, L228, L234 and all CTLs.
|Manufacturer/model||FPT /F5H FL463A*F001|
|Bore/stroke, in (mm)||3.9 x 4.3 (99 x 110)|
|Displacement, in3 (L)||207 (3.4)|
|Fuel injection||HPCR Direct|
|Air intake||Turbocharged Aftercooled with external EGR|
|Horsepower per SAE J1349 Gross hp (kW)||74 (55) @ 2500 rpm|
|Horsepower per SAE J1349 Net hp (kW)||68 (51) @ 2500 rpm|
|Peak torque, lb-ft (Nm)||232 (314) @ 1400 rpm|
|Travel speed, low range, mph (km/h)||7.0 (11.3)|
|Travel speed, high range (optional), mph (km/h)||10.5 (16.9)|
|Bucket hinge pin, in (mm)||129.4 (3287)|
|Top of ROPS, in (mm)||78.8 (2002)|
|Bottom of level bucket, fully raised, in (mm)||122.6 (3115)|
|Overall length without attachment with coupler, in (mm)||117.8 (2993)|
|Dump angle, degrees||54.7|
|Dump reach (max height), in (mm)||32.3 (821)|
|Rollback, bucket on ground, degrees||33.8|
|Rollback, bucket at full height, degrees||84.8|
|Wheelbase, in (mm)||52 (1322)|
|Ground clearance (bottom of belly pan), in (mm)||8 (203)|
|Angle of departure, degrees||23.5|
|Clearance circle without bucket, in (mm)||56.2 (1428)|
|Clearance circle rear, in (mm)||70.4 (1789)|
|Rear axle to bumper, in (mm)||40.7 (1034)|
|Overall width, in (mm)||69.6 (1768)|
|Pump flow, Standard Flow, gpm (Lpm)||24.2 (91.5)|
|Relief pressure, psi (bar)||3046 (210)|
|Optional high flow, gpm (Lpm)||37.6 (142.5)|
|Rated operating load, 50% tip, lbs (kg)||2800 (1270)|
|Tipping load, lbs (kg)||5600 (2540)|
|Breakout force, lift cylinder, lbs (kN)||6030 (27.3)|
|Breakout force, bucket cylinder, lbs (kN)||8620 (38.3)|
|Operating weight, lbs (kg)||8245 (3740)|
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.