Exmark RAX730GKA604A3

Exmark RAX730GKA604A3 for sale at Altman Tractor Co., SC

Double tap to zoom

Exmark RAX730GKA604A3 for sale at Altman Tractor Co., SC

 

Features

UltraCut Deck Technology

Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.

Heavy Duty Unibody Frame

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

Quick Adjustable Rollover Protection System (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

Fuel Gauge Window

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

Height of Cut Made Easy

The height of cut is positioned to provide an open operator platform that allows the operator to quickly locate the preferred cut position when viewing from the top down.

Comfort Stepped Up

X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.

Service Made Easy

A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.

Specifications

NOTES: N/A in California

Equipment  
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Drive Tires 24 x 10.5-12 K500
Cup Holder Standard
Tractor Frame Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
Parking Brake Lever-actuated pawl brake.
Seat Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
Electrical 12-volt battery with 15-amp alternator.
Standard Features Engine hour meter, cup holder, tow hitch and jack receiver
UPC 193308000435
Power Components  
Engine Brand Kawasaki®
Engine Model FX730V
Engine Displacement 726
Engine Series V-Twin
Engine Type Carbureted
Engine Speed 3,700 rpm
Air Filter Cyclonic Air Cleaner
Fuel Type Gas Carbureted
Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator Translucent Visual
Drive Hydro-Drive
Drive Description Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed Infinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-6.0 mph (9.7kmph) reverse.
Carb Compliant No
Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .375" thick caster yoke arms
Decks  
Width / Cutting Deck 60"
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 20.50" Length
Dimensions  
Width 72.7 in (184.7 cm)
Length 82.2 in (208.8 cm)
Height 70.4 inches (178.8 cm)
Curb Weight 1006

Accessories and Attachments

RadiusXMicro Mulch SystemMicro-Mulch System

The aerodynamically designed deck, baffles and blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Mulching baffles also keep the underside clean, which reduces grass buildup and clumping.

 

 

RadiusXOpControlledDischargeOperator Controlled Discharge (Hand)

The infinitely adjustable blocker door opens and closes, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.

 

 

ExmarkAccess Noimage12-Volt Power Adapter

Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)

 

 

RadiusX3 Bushel Bagger Adapter3-Bushel Bagger Adapter

Adapter required for GC3602 3-Bushel Bagger (48" and 52" models).

 

 

RadiusX 5 Gallon Bucket5-Gallon Bucket

Carry a 5-gallon bucket on your mower to pick up unwanted debris while mowing. Mount not included.

 

 

RadiusX Equipment CoverEquipment Cover

Protect your zero-turn mower from the elements with this sturdy, waterproof cover. It’s constructed from tough 600-denier polyester, making it abrasion- and tear- resistant. Its elastic opening provides a secure, snug fit.

 

 

ExmarkAccess NoimageSeat Cover– Suspension 20" Back

Protect your new seat or make your old one look new. Fabric coated for maximum water resistance and repellency. Cushioned for extra comfort. Elastic cord in bottom hem for custom fit. (Fits suspension seat.)

 

 

RadiusX JackJack

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

 

 

RadiusXEngine Maintenance KitKawasaki FXEngine Maintenance Kit - Kawasaki FX

Contains everything a do-it-yourselfer needs to keep their Exmark running like new. Includes Air Inner & Outer Element Filters, Oil Filter, Fuel Filter, Spark Plugs, Fuel Treatment and Engine Oil.

 

 

ExmarkAccess NoimageExtended Drive Lever Kit

 

 

 

RadisuX Front Bucket Mount and 5 Gallon BucketFront Bucket Mount & 5-Gallon Bucket

Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing

 

 

RadiusX Bucket Mount KitBucket Mount Kit

Easily attach a 5-gallon bucket to your mower to pick up unwanted debris while mowing. Bucket not included.

 

 

RadiusX Hydro Maintenance KitHydro Maintenance Kit

Kit includes: 5 Bottles Exmark Premium Hydraulic Oil and 2 Hydro Filters

 

 

RadiusX Light KitLEDLight Kit - LED

Better and brighter than ever, this quick-install light kit keeps your productivity going into the night. Low profile, and impact-resistant, this ROPS mounted accessory emits powerful light without the use of significant amperage capacity.

 

 

RadiusX Sun Shade ROPSSun Shade (ROPS)

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

 

 

ExmarkX Trash ContainerTrash Container

Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.

 

 

RadiusX Semi Pneumatic Tire AssemblySemi-Pneumatic Tire Assembly

Customize your ride with just the right caster tire.

 

 

RadiusX 3 Bushel Bagger3-Bushel Bagger

Lightweight and easy to attach, this 3-bushel grass catcher fits all Exmark Lazer Z, Pioneer, Radius, Vantage* and wide-area walk-behinds. (*Not available for Vantage Propane models.) 116-7042 spacer adapter required for 36" deck models.

 

 

RadiusX Turf Striping KitTurf Striping Kit

Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

 

 

ExmarkAccess NoimageCompleting Kit - Powered

Completing Kit - Powered

 

 

ExmarkAccess NoimageUltraVac Completing Kit 

UltraVac Completing Kit

 

 

ExmarkAccess Noimage2-Bag Collection System – Powered

 

 

 

RadiusX UltraVacUltraVac

2-bagger commercial-grade powered collection system. Switch between bag discharge and side discharge with quick-attach. Less clogging with larger-diamer tubes. Compact design minimizes trailer space for easy maneuverability. Dust reduction with sealed hoods.

Contact Us Hide

GOT A QUESTION?

Let us help you get moving.