TTS680PKC483E0 for sale at Altman Tractor Co., SC. Serving your new and used equipment needs from Florence, and Conway, SC.
Turf Tracer S-Series Propane
Unique "Vapor Draw" Design
The propane tanks are of a unique "vapor draw" design that includes a special baffle system to prevent liquid propane ingestion into the supply line, which can cause damage to fuel system components and render the unit inoperative.
Lower Operating Costs
Typically, fuel costs for propane will be less than gasoline, which results in lower operating costs.
Green Alternative Fuel
Propane is considered a Green Alternative Fuel and when burned, it produces less GHG (green house gas) yielding a reduced carbon footprint as compared to gasoline. PERC (Propane Education & Research Council) reports that GHG reductions typically range in the 20% to 25% range.
No Hour Restrictions
No known restrictions regarding hours of operation on "Ozone Action Days."
Cleaner Burning Fuel
Propane is a cleaner burning fuel and has fewer combustion by-products as compared to gasoline. Engine oil will contain less contaminates for the equivalent hours of operation.
No deterioration or breakdown of fuel over time creating "varnish deposits" as gasoline does. No need for fuel stabilizers during long periods of storage.
|Steering Control||Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.|
|Casters||.38" thick caster yoke arms|
|Front Caster Tires||9 x 3.5-4, smooth-tread, semi-pneumatic.|
|Drive TInes||16 x 7.5-8, 4-ply Turf Master®|
|Safety Package||Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine|
|Parking Brake||Lever-actuated mechanical compression.|
|Electrical||12-volt battery with 15-amp alternator.|
|Engine Series||Command™ EFI|
|Engine Speed||3,600 rpm|
|Air Filter||Standard Engine Manufacturer's air filter|
|Drive Description||Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.|
|Speed||Infinitely variable speed selection from 0- 6.2 mph (10 kmph) forward, 0-2.2 mph (3.5 kmph) reverse.|
|PTO Engagement||Electromagnetic 125 ft-lbs clutch.|
|Fuel Capacity||33.5-lb propane tank|
|Drive Wheel Release||Allows unit movement without engine running.|
|Deck Lift||Manual lift with hairpin from hole to hole for position adjustment.|
|Engine Type||EFI Propane|
|Fuel Indicator||Yes - Float Gauge|
|Fuel Type||Propane EFI|
|Deck Style||Floating Deck|
|Deck Style Description||Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.|
|Width / Cutting Deck||48"|
|Deck Construction||10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.|
|Cutting Heights||1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.|
|Blade Spindles||No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.|
|Blade Tip Speed||Approximately 18,500 fpm.|
|Blades||3 Blades at 16.25" Length|
|Width||59.5in. (151.1 cm)|
|Length||73.7 in. (187.2 cm)|
|Height||42.0 in. (106.7 cm)|
Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.